Teltonika Portforwarding

From Bondix Wiki
Revision as of 11:11, 17 January 2023 by Red (talk | contribs)

Port Forward from a Teltonika router to the Server

Prerequisites: The tunnel should be configured with a static IP.

Teltonika Port Forward Settings.png

  • Protocol: as required by your needs. Defaults to TCP+UDP
  • Source zone: must be "bondix"
  • External port: The port used for the forwarding.
  • Internal zone: LAN or WAN, depending on where the target device is located
  • Internal IP address: the target device
  • Internal port: the target port

In the firewall general settings, make sure that Masquerading for LAN => Bondix is enabled.

Retrieved from "https://wiki.bondix.dev/index.php?title=Teltonika_Portforwarding&oldid=251"